WAGNER Paint Crew Manual de usuario

Wagner Product Training

Assembly1. Attach the handle with the 2 screws and wing nuts provided.2. Attach the high pressure hose to the outlet.3. Attach the high pressure hose

Purging and Priming the pump1. Make sure the inlet filter is secure in the hopper. If not, snap into place.2. Press down on the filter. This will fo

Purging and Priming the pump – cont.4. Turn the prime/spray valve to prime.5. Plug the unit in and turn it on.6. Any fluid remaining in the sprayer wi

Purging and Priming the spray hose and gun1. Remove the spray tip and tip guard from the spray gun.2. Unlock the trigger lock and with the trigger pul

Practice spraying1. Make sure the spray hose is free of kinks and sharp obstructions.2. Turn the sprayer on and the Prime/Spray Knob to Spray.3. When

How to Spray - DistanceOnce you have achieved a good spray pattern on your test piece of wood or cardboard, it is time to begin spraying your work. T

How to spray – TechniqueKeep the sprayer at right angles to the surface. This means moving your entire arm back and forth rather than just flexing yo

How to spray – Technique cont.The sprayer should be triggered by turning it on and off with each stroke. This will save paint and avoid paint buildup

Clean upShort-term clean up (Water based paints only)If you are leaving a project for a few hours or overnight:1. Unplug the sprayer and turn the Prim

Clean up – cont.Long-term cleanup (Purging the Paint)1. Turn the Prime/Spray knob to Prime to relieve the pressure.2. Trigger the gun to verify that t

Safety Considerations and RecommendationsAs with any power tool, you need to exercise a level of care to ensure user safety.Wagner products used corre

Clean up – cont.Long-term cleanup (Rinsing the Hopper and Pump)1. Rinse the hopper with the proper cleaning solution and empty.2. Remove the inlet fil

Clean up – cont.Long-term cleanup (Spray Gun)1. Trigger the gun to verify that the pressure has been relieved.2. Remove the gun from the hose.3. Remov

Clean up – cont.Long-term clean up (Spray Gun)5. Clean debris off of the filter, tip, and tip guard components with the appropriate solution.6. Place

Clean up – cont.1. Complete all long term cleaning steps.2. Remove the inlet filter in the hopper.3. Pour 60 ml of household oil in the inlet.4. Remov

TroubleshootingProblem Cause SolutionThe sprayer does not start The sprayer is not plugged inThe ON/OFF switch is set to OFFThe sprayer shuts off whil

Troubleshooting – cont.Problem Cause SolutionThe PRIME/SPRAY valve is on SPRAY and there is flow through the return tubeThe PRIME/SPRAY valve is dirty

Application26

Paint Crew Roller ArmThe Paint Crew Roller Arm allows the Paint Crew user to choose between power spraying and power rolling.Attach the roller arm dir

Safety Considerations and Recommendations – cont.1. Before using the equipment, read and observe the safety instructions detailed in the Users Manual.

Safety Considerations and Recommendations – cont.5. No sources of ignition are to be in the immediate area when spraying eg. open flame, cigarettes, s

Paint CrewPaints & MaterialsWater diluted materials such as interior wall emulsion paints, interior wall latex paints, acrylic paints, acrylic var

Paint Crew Airless Sprayer6

Components of Paint CrewThe Paint Crew is a breakthrough in Airless Piston Pump Technology designed for the Home Owner. The drawing below shows the s

How it works• The Paint Crew utilises an airless piston pump in the base of the unit to pressurise the paint to 2750 PSI. The paint is then forced th

How it works – cont.• Return TubeDirects paint back into the hopper while priming the sprayer• Spray GunConstructed of rugged metal for durability, th